Good afternoon.
I have a issue with printing in terminal services.
First here is a bit of infrmation.

I have 400 users connecting to my terminal servers using RDP. All my TS servers are windows 2003 server standard edition.
I have 2 print servers again windows 2003 standard edition all servers have SP 1 installed.
All above servers are still on the 125.x.x.x network.

The problem I have is, we are currently going through a big network schema change. We are currently on a 125.x.x.x network but moving over to 10.x.x.x
All printers worked correctly when on the 125.x.x.x network but since moving a couple of printers over to the 10.x.x.x network (Users on the same segment as the printers have also been oved over to 10.x.x.x network) there has been issues.

1) Prints take 30 minutes to spool.
2) Prints spool much larger than the original files size. Example a 2 MB file spools as 30MB.
3) Documents start to print then just stop after a few pages.

Send any document with the above issues to a printer on the old network and they spools straight away and print off no issues.

I have created a new print server which lives on the new 10.x.x.x network this can print directly to the printers no issues but if we use this server in TS same issues as when using a print server on the old network.

I have even moved over one of our TS server to the new 10 network but printing issues are still there.

Printers are.
Xerox workcentre C2128.
HP LJ4.
HP LJ5.
HP LJ1300.

Any suggestions would be appreciated.
Thankyou.